5 °C at 100 rpm At different time intervals, sample was withdraw

5 °C at 100 rpm. At different time intervals, sample was withdrawn, diluted and analyzed by UV-spectrophotometer at 335 nm and 210 nm for outer and core tablets respectively. After estimating different drugs contents and in-vitro study results, the optimized tab-in-tab formulation (T3) was retained for 3 months under accelerated stability conditions of temperature and relative humidity (40 ± 2 °C/75 ± 5% RH) in stability chamber (Thermolab, India). The samples were taken out at 30, 60 and 90 days and evaluated for appearance, weight, hardness, drugs content and dissolution study. Three male rabbits of weight 2–2.5 kg

were fasted overnight in each experiment, although free access to water was allowed. During the course of the experiment, water was not given until 2 h after administration of test preparation. The oral doses of the drugs were calculated on the basis of their CHIR-99021 cell line body weights and then accordingly formulated for animals. After oral administration of the test preparation, 3 ml blood samples were collected at predetermined time intervals. Plasma

was immediately separated by centrifugation of the blood samples at 10,000 rpm for 10 min. All plasma samples were immediately frozen at −20 °C until analysis. A sample was extracted with methylene chloride, NIF was separated on ODS column by isocratic elution with acetonitrile- 5 mmol/L ammonium acetate (52:48 v/v) at the flow rate of 1 ml/min, and detected by mass spectrometry Ku-0059436 supplier in the selected ion monitoring (SIM) mode.9 The solid-phase extraction technique was used for the extraction of RAM from the sample. Chromatography was performed on Aquasil column, with the simple reversed isocratic phase consisting of acetonitrile–water (65:35 ratio) and 1.0 ml/L ammonium trifluoroacetate solution (1.0 M) and followed by detection using mass spectrometry.10 Data was statistically evaluated using SPPS software. P value of <0.05 was considered to be significant. The SE micrograph of NIF-loaded gelatin microcapsule was spherical in shape

with smooth surface (Fig. 2). This might be due to proteinaceous nature too of gelatin and decrease surface indentation. The geometric mean diameter of microcapsules was 6.52 ± 0.26 μm. The % EE of NIF in the gelatin microcapsules was 98.01 ± 2.1. The gelatin microcapsules enhance its encapsulation due to increase solubility in ethanol. SLS was used to avoid attaching gelatin microcapsule to the inner wall of spray-drying chamber and to produce free-flowing powder.11 NIF solubility and the amount of encapsulated ethanol increased due to optimum amount of SLS. The amount of NIF dissolved from gelatin microcapsules for 30 min were much higher 85.31 ± 0.96% as shown in Fig. 3. This signifies its solubility increased in SGF. The bioavailability of poorly water-soluble NIF was improved in gelatin microcapsules due to amorphous form of drug and cosolvent effect of ethanol because the gelatin wall of microcapsule was very soluble.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>