For example at 4% uniaxial strain, the phase transition from meta

For example at 4% uniaxial strain, the phase transition from metallic to semiconductor occurs at a GNR width of approximately 3m. The phase transition is not observed in AGNR n=3m[15]. When higher strain is applied, the phase

transition occurs at a lower width. The difference in GNR width for the phase transition to occur depends on the subband selleck chemicals llc spacing effect with GNR width [21]. The constitution of the phase transition suggests that the GNR bandgap can be tuned continuously between the metal and semiconductor by applying strain. Figure 2 Bandgap of AGNR in respond to the width for (a) n=3m and (b) n=3m+1 . Based on the energy band structure, the analytical model representing the DOS of strained AGNR is derived as in Equation 7. It is necessary to understand the DOS of strain AGNR as it will give insight on the amount of carriers that can be occupied in a state. The analytical model XMU-MP-1 solubility dmso for strained AGNR C59 wnt mouse is shown in Figure 3 for the first subband for the two AGNR families. It appears that the patterns of DOS are essentially the same for both AGNR families. It can be observed from Figure 3a,b that the Van Hove singularities are present at the band edge. For AGNR with n=3m, the increment of strain increases the DOS remarkably. However, when ε=3%, despite the wide bandgap, the DOS substantially decreases. This is the reason for changing the band index, p, which corresponds to the bandgap [15]. In the case of

n=3m+1, the DOS exhibits the opposite. In fact, when the strain strength made the band approach the transition phase, the DOS reduces significantly; at the same time, the bandgap approaches zero. Figure 3 DOS varying the uniaxial strain strength GBA3 in AGNR (a) n=3m and (b) n=3m+1 . To assess the effect of strain on AGNR carrier concentration, the computed model as in Equation 8 as a function of η is shown in Figure 4. Apparently, the amount of carriers increases

when the AGNR n=3m is added with uniaxial strain. Conversely, AGNR n=3m+1 shows a reduction in carrier concentration upon strain. Most notably, for AGNR n=3m, the carrier concentration converges at low η within the investigated strain level. Meanwhile, the carrier concentration exhibits considerable effect upon the strain when the Fermi level lies at 3 k B T away from the conduction or valence band edge. The same observation was achieve in AGNR n=3m+1. Figure 4 Uniaxial strained AGNR carrier concentration as a function of normalized Fermi energy for (a) n=3m and (b) n=3m+1 . To assess the carrier velocity effect with carrier concentration upon the strained AGNR, the analytical model in Equation 10 is plotted in Figure 5. It can be seen from Figure 5a,b that the GNR carrier velocity decreases and increases with the applied uniaxial strain for AGNR n=3m and AGNR n=3m+1 families, respectively. Inspection of these figures also showed that the uniaxial strain mostly affected the carriers at high concentration.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>