Administered dosages were tapered towards a normal prophylactic regimen of 15–25 IU

FVIII kg−1 three times a week, according to previously described intermediate dose prophylaxis [11]. When FVIII treatment was started because of a life threatening bleed or surgery, and the inhibitor level was less than 10 BU mL, an initial bolus with FVIII was given to neutralize the inhibitor [4], followed by 25 IU kg−1 FVIII twice daily for Dorsomorphin supplier 1–2 weeks, depending on the clinical status of the patient and the anamnestic response to FVIII. During ITI in patients with a high titre inhibitor, surgical procedures, such as insertion of a PAC system, were covered with recombinant factor VIIa (rVIIa, Novoseven®; NovoNordisk, Copenhagen, Denmark). Bleeds were treated with both APCC (Feiba®; Baxter, Vienna, MI-503 in vivo Austria) or rVIIa (Novoseven®). Plasma sampling  Plasma samples to determine FVIII levels

and inhibitor assays were collected using standard techniques: 4.5 mL venous blood was drawn in a vacutainer in which 0.5 mL sodium citrate (109 mol L−1) was added as an anticoagulant. After centrifugation at 3000 × g for 15 min at 4°C, the platelet-poor plasma was carefully pipetted off and plasma was stored at −20°C. In small children 1 mL cups were used, containing 0.1 mL sodium citrate to which 0.9 mL blood was added. Inhibitor assays  Factor VIII antibodies were initially performed according to the Bethesda MCE公司 method as described by Kasper et al. [12]. In 1995, the Nijmegen modification was introduced [13]. This modification was subsequently used in our laboratory. Antibody titres of ≥1 BU mL−1 were defined as positive in the original test, whereas antibody titres >0.3 BU mL−1 were considered positive in the Nijmegen modification. With exception of patient one, all samples tested with the original Bethesda assay were retested with the Nijmegen assay. For this study, only the results of the Nijmegen assay were used. Inhibitor patients were tested every 4–8 weeks during their ITI treatment and the first 6 months

after successful ITI. Subsequently inhibitor tests were carried out once or twice yearly until end of follow-up. Factor VIII assay  Factor VIII assays were performed using the one stage method and expressed as a percentage of FVIII present in normal pooled human plasma. In vivo recovery and factor VIII half life  To determine in vivo recovery in patients with an inhibitor titre below 10 BU mL−1, blood samples were taken before, and 15–30 min after FVIII infusion. Recovery was defined as the level of FVIII measured in relation to the expected level of FVIII, calculated according to Lee et al. [14]. A FVIII recovery of 66% or more was considered normal. Factor VIII half life was determined after a wash out period of 72 h.