This may be the reason behind the low cell performance. Figure 8 Photocurrent density-voltage curves of selenium solar cells with various H 2 SeO 3 concentrations. The annotation selleck chemical numbers in Figure 8 suggest the H2SeO3 concentrations. Conclusion 3-D selenium ETA solar cells using an extremely thin absorber Se layer on nanocrystalline TiO2 electrodes were fabricated by electrochemical deposition method. The crystallinity of the selenium layer after annealing at 200°C for 3 min in the air was significantly improved, and the band gap became narrower in comparison to the sample both with and without annealing at 100°C. The photovoltaic performance features of the best 3-D selenium ETA solar cells are J SC = 8.7 mA/cm2, V

www.selleckchem.com/p38-MAPK.html OC = 0.65 V, FF = 0.53, and η = 3.0%. These results are interesting for PV researchers because the fabrication method for this kind of solar cells is quite simple. However, in order to get a higher efficiency, the photocurrent density should be more improved. Acknowledgment Part of this work was funded by the Innovative Solar Cells Vorinostat concentration Project (NEDO, Japan). References 1. Nanu M, Schoonman

J, Goossens A: Inorganic nanocomposites of n- and p-type semiconductors: a new type of three-dimensional solar cell. Adv Mater 2004, 16:453–456.CrossRef 2. Nanu M, Schoonman J, Goossens A: Solar-energy conversion in TiO 2 /CuInS 2 nanocomposites. Adv Funct Mater 2005, 15:95–100.CrossRef 3. Nanu M, Schoonman J, Goossens A: Nanocomposite three-dimensional heptaminol solar cells obtained by chemical spray deposition. Nano Lett 2005, 5:1716–1719.CrossRef 4. O’Hayre R, Nanu M, Schoonman J, Goossen A: A parametric

study of TiO 2 /CuInS 2 nanocomposite solar cells: how cell thickness, buffer layer thickness, and TiO2 particle size affect performance. Nanotechnology 2007, 18:055702.CrossRef 5. Nattestad A, Mozer AJ, Fischer MKR, Cheng YB, Mishra A, Buerle P, Bach U: Highly efficient photocathodes for dye-sensitized tandem solar cells. Nat Mater 2010, 9:31–35.CrossRef 6. Yum JH, Baranoff E, Kessler F, Moehl T, Ahmad S, Bessho T, Marchioro A, Ghadiri E, Moser JE, Yi C, Nazeeruddin MK, Grätzel M: A cobalt complex redox shuttle for dye-sensitized solar cells with high open-circuit potentials. Nature Commun 2012, doi:10.1038/ncomms1655. 7. Yella A, Lee HW, Tsao HN, Yi C, Chandiran AK, Nazeeruddin MK, Diau EW, Yeh CY, Zakeeruddin SM, Gräzel M: Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency. Science 2011, 334:629–634.CrossRef 8. Ito S, Zakeeruddin SM, Comte P, Liska P, Kuang D, Grätzel M: Bifacial dye-sensitized solar cells based on an ionic liquid electrolyte. Nature Photonics 2012, 2:693–698.CrossRef 9. Wienke J, Krunks M, Lenzmann F: In x (OH) y S z as recombination barrier in TiO2/inorganic absorber heterojunction. Semicond Sci Technol 2003, 18:876–880.CrossRef 10. Valdés M, Frontini MA, Vázquez M, Goossens A: Low-cost 3D nanocomposite solar cells obtained by electrodeposition of CuInSe 2 .